What You Should Know About Experts This Year

How To Keep Your Air Duct Clean An air duct is a hollow tuning that directs air from the exterior of a building to its interior, and vice versa. It is also referred to as an air hole or ventilation shaft. For life to exist, there has to be an adequate supply of clean air.
5 Key Takeaways on the Road to Dominating Experts
Humans being living organisms also need fresh air so that they can be able to survive. For this reason, it is imperative that people come up with better ways of ensuring that the air quality in their places of residence has been improved. The ventilation shaft present in most of our homes are one of the accomplishments achieved in helping maintain good air quality within our surroundings.
The Best Advice About Ducts I’ve Ever Written
Air holes actually act as sieves as they bring in cold fires air and expel dump and stuffy hot air. During this continuous process, dust particles present in the air get occasionally trapped within the ventilation unit leaving it clogged in the long run. For this reason, it is imperative that the air duct is cleaned up once in a while. Achieving this is quite simple. Tools required to facilitate this exercise include a vacuum cleaner, a couple of paper towels, screwdriver, toilet brush and a new furnace filter. Before any cleaning can proceed, all openings that provide heated air are first covered using the paper towels. Covering these ends are much needed since it prevents the dust within the vent from escaping into the room during cleaning. Secondly, it is always important to turn on the fan before and during air duct cleaning. When cleaning, dust particles disintegrate. When the fan is on, it helps move these particles along the shaft thus simplifying an individual’s work. Cleaning should always be done while the old furnace filter is still intact. This can be attributed to the fact that the filter helps trap dust particles during cleaning so that they cannot affect the functioning of the fan. Hence it is always responsible for one to ensure that you are cleaning while the old furnace filter is still in place. When it comes to cleaning a ventilation shaft, no stone should be left unturned. This is to say that the individual cleaning should ensure that he has carefully cleaned all spaces within the shaft that might have a build up of dust in them. The same criteria should be used while cleaning the air registers. It is only after rigorous scrubbing that the vacuum cleaner is used to suck out the loose dust particles from the vent. This the process leaves the ventilation shaft entirely clean. The furnace filter always gets worn out after it has been utilized for a considerable amount of time. For this reason, it is not able to purify the ventilation shaft effectively. It is therefore important that it be replaced with a new filter that is capable of trapping any dust particles present in the air shaft.